We do not manufacture/make the BlackMax covers. They are made by Extang and the replacement covers/tarps like the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1915 that you were looking at are provided to us from Extang as replacement parts.
If you are needing a replacement tarp/cover and you can let me know the model number of the cover that you have, I can see if we have the correct replacement or reach out to Extang to see if it is available. view full answer...
I may be able to provide a solution for you here, but we do not have any wheels that are 15" diameter and 5" wide; additionally since the wheels we carry are designed for use on trailers, almost all of them will not have an offset, so you will need to take that into consideration when choosing one for your truck. With that said, we do have wheels that are 15x6 in a 6 on 5.5" bolt pattern, which would require the use of a tire that is 205, 215 or 225 wide like the # AM10303 -but you will... view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 18252.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake... view full answer...
Curt Channel Style Adjustable Ball Mount, part # C45900, is only available with 2 and 2-5/16 inch diameter trailer balls.
Curt offers a different adjustable ball mount that can be used with all three ball sizes, part # D900. The ball mount is rated for 6000, 7500 or 10,000 lbs, depending on which ball is being used. Due to the adjustable rise or drop, this versatile ball mount would allow you to tow many different types of trailers. view full answer...
We do offer a tonneau cover for your 1968 Chevrolet C/K Series Pickup with 6-foot stepside bed.
Craftec offers a low-profile hatch-style cover, part # 251185, that features an aluminum frame and high-grade UV-resistant vinyl. This cover installs without drilling (the frame clamps on) and it is compatible with bed liners.
The Craftec cover lifts up from the tailgate as shown in the linked photo to provide you with easy access to your truck bed. view full answer...
For a 4" span the Roadmaster Hitch Lock for 2" Hitches # RM-316 you were looking at is going to the be the best option since it comes with two locks that keyed alike. view full answer...
If your 2000 Chevrolet C3500 HD pickup has a tow package with a 7-way trailer connector and wiring already in place, then you can use Tekonsha adapter # 3025-P to connect the Prodigy P3 # 90195 to the under-dash connection port. The adapter harness you referenced, part # 3026-P, will not fit.
The linked photo and article show the connection port and the linked video details an example of the brake controller installation process.
If your truck does not have a factory-installed 7-way (but... view full answer...
We don't carry vehicle rims, but we are aware that many people use trailer wheels like our Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black, # AM20504 along with the Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1, # AM90086 for a vintage look.
We cannot recommend trailer wheels for vehicle use, but these rims look very nice on vintage trailers. view full answer...
You would need to install fifth wheel rails in the bed of your 1995 Chevy truck, but yes the Patriot Slider hitch part # BWRVK3270 would work well once they are installed.
For a fifth wheel rail kit that is a fit for your truck you would want the part # RP30035. view full answer...
The closest lights we offer to the # BA44FNL and the # BA44FNR in LED is part # MCL12ARRB and # MCL12ARLB.
I attached an install and review video for these lights for you to check out as well. view full answer...
The Craftec Hatch-Style Tonneau Cover for your 1956 Chevrolet C/K Series pickup with 6-foot bed stepside bed is indeed the item you referenced, part # 251185. This cover allows 1 person to completely remove it when bed access is needed. It is USA-made and carries a 3-year vinyl warranty and a limited lifetime warranty on the aluminum frame. view full answer...
We do not offer any wiring adapters to convert a 12-pin female connector on a military vehicle to a standard RV-style 7-way like # 37185 or a 4-pole like # 18252. But you can install a different type of trailer socket on the truck by hardwiring one.
Based on the information I could find about your military connector the wires have letter codes on them and carry the following functions common on most trailers:
J is the right turn signal
B is left turn signal
E is tail lights
D is ground
K... view full answer...
The capacity of the Pintle Hook Mount, # 63058, is 8,000 pounds maximum no matter how it is mounted. Any more weight on it than that could cause the unit to fail and would void the warranty.
We have a cushioned mount with 10 holes rated for 10,000 pounds, # AMPC3. I have included a link to a video review for you. There is also a 7-1/2 inch tall Tow Ready model, # 63059, rated for 12,000 pounds. These 2 options are going to get you the closest to the height of the 8K model with the capacity... view full answer...
B&W Gooseneck Hitch # BWGNRK1000 is confirmed to fit your long bed 1998 Chevrolet C/K Series Pickup. The center section of this complete hitch is available on its own as part # BWGNRC800. view full answer...
We do have trim rings for 14" wheels # PXQT544CLO and 15" wheels # QT655CLO. Unfortunately we do not have anything available for a 13" wheel at this time.
We do carry baby moon hub caps like the # AM90086, which would fit the Dexstar 13" Wheel # AM20212 that you were looking at. view full answer...
We do offer a 2-inch Class V trailer hitch for your 1997 Chevrolet C/K Series Pickup with 10-Inch deep drop bumper. Curt hitch # C15317 offers a very substantial 2400-lb tongue weight capacity and a gross trailer weight rating as high as 17,000-lbs if used with weight distribution. If your truck carries a different weight rating then the lower-rated item becomes the overall limit.
This hitch installs without drilling or welding using the included hardware. Your spare tire will need to... view full answer...
We do not carry a aftermarket spare tire repositioner that you may need to use when installing the Curt Trailer Hitch Receiver # 13942 on your 1989 Chevy C/K Pickup. view full answer...
Yes, Fulton does make a black plastic fender, part # F008585 that will accommodate 15 inch tires. We carry it on our site and I have added a link to it below. It measures 40 inches long, 12 inches tall and 9 inches wide. view full answer...
You have a 2-3/8 inch O.D. pipe so you might want to look at #84 Spindle, # TRU84FR, which has a 2 inch O.D. at the weld point and has a 1750 lb. capacity, so two spindles will give that axle 3,500 lb capacity.
The #42 Spindle, TRU57FR which has a 2.25 inch O.D. at the weld point and is rated for 5,200 lbs to 7,000 lbs axles. The total capacities of the spindles are only valid if installed correctly and the axles are not broken or damaged in any way.
The TruRyde #84 Spindle, # TRU47FR,... view full answer...